Customer Reviews
89%
10%
0%
0%
0%
1-6 of 37 reviews
Add a review
You must be logged in to post a review
Log In
د.إ 2,399
Excl. VAT · calculated at checkout
A cable-free 4K PTZ streaming camera with AI subject tracking, NDI|HX3 wireless streaming, and USB-C / HDMI / PoE Ethernet outputs — just 344.5 g. Pan ±150°, tilt -65° to 32°, all controlled hands-free.
In stock
The Tail Air is a full 4K@30fps PTZ streaming camera built around a 1/1.8″ StarLight CMOS sensor (8.4MP, ƒ/1.8 aperture) — sharp, low-light-capable footage from a body that weighs just 344.5 g.
Stream over NDI|HX3 via Wi-Fi or Ethernet — no capture card, no HDMI run across the room. Connect over USB-C, micro HDMI, or PoE Ethernet, whichever fits your setup. (NDI streaming requires the NDI activation license — sold separately or bundled depending on version.)
AI subject tracking automatically pans, tilts and zooms to follow a presenter, host or performer — a 2-axis motorized gimbal with ±150° pan and -65° to 32° tilt, tracking movement at up to 120°/s.
Designed to work alongside other Tail Air units or OBSBOT cameras for multi-angle live production — podcasts, panels, worship, classrooms, and full studio setups.
To capture a video signal, connect your two devices to the same switcher using either a micro HDMI or USB port. If you need to control the devices, our smart remote can manage up to three at once. For a Power over Ethernet (PoE) connection, use a VISCA-compatible control panel to handle your Tail Air devices. If you're controlling and receiving video signals from more than two Tail Air devices, consider using NDI supported hardware or software.
As the OBSBOT Tail Air supports the VISCA and NDI, you can control your devices via LAN by supported control panels or softwares.
With NDI丨HX3 support, OBSBOT Tail Air can be controlled via the NDI protocol supported Controller and Switcher.
The battery in Tail Air is not replaceable. If you need extra endurance, consider our 360° play-more combo. Alternatively, you can use a power bank to extend the device's endurance.
The setup of your solution affects compatibility. Currently, our mobile app allows pairing of a single device with one mobile. The Smart Remote Controller can control up to three Tail Air devices. If you utilize the OBSBOT Webcam software for computers, its capability increases. With Tail Air devices connected to NDI, there's theoretically no limit to the number of devices, provided your network status can support this setup. For a wired connection, the number of ports and capabilities of your switcher are key factors for Tail Air's multicam setup.
There are several ways to control OBSBOT Tail Air. Besides the Smart Remote Controller, you can download the Obsbot Start App to control the Tail Air device on your phone and tablet.
Tail Air has three charging methods: a USB-C to C cable, PoE (Power Over Ethernet cable), and an external 360-degree rotating base for charging.
Yes, there is a built-in microphone, and an external microphone can be connected via a 3.5mm jack. This means that it's possible to record audio from an external microphone device.
Yes, OBSBOT Tail Air can be used as a webcam.
Yes, OBSBOT Tail Air supports live streaming when using the SD card to record the outputted video.
The relevant info is as followed: Data Link Protocol：Ethernet Data Transfer Rate：10/100 Mbps Power-Over-Ethernet：IEEE 802.3 af, Max power 13W USB-C Charge Port：5V/2A USB-C to OBSBOT Tail Air：5V/2A
You can use the OBSBOT Tail Air as a camera for meeting software (including Google Meet, Microsoft Teams, etc.) over a wireless connection with your computer. This can be done via NDI, RTSP, or by outputting the virtual camera's signal to the appropriate software.
We recommend using a U3 micro SD card, and OBSBOT Tail Air supports micro SD cards in exFAT and Fat32 formats (NTFS not included). Its maximum storage capacity is 512GB.
The AI Auto Tracking for Tail Air supports not only Human Tracking but also Animal Tracking and Object Tracking. The feature on Tiny 2 supports Human Tracking only.
Up to three Tail Air devices can be connected with one Smart Remote Controller, and no extra app is required to activate the AI Auto Tracking, PTZ, and other powerful features when using the Remote Controller.
Yes, OBSBOT Tail Air can shoot from upside-down. The video image will automatically flip when the device is installed upside-down.
Hi James,
We regret to inform you that we don't offer official dedicated wall-mount parts for Tail Air currently.
It features a standard UNC 1/4-20 interface on the bottom. You can buy a matching mount from trusted shopping platforms, as long as the mount supports this specification.
Should you need further assistance, please contact us anytime.
Best regards,
Minar Media Systems
Hi Yainier,
Thank you for your question.
Unfortunately, you cannot access the live stream remotely using only an internet connection.
To view the feed, please ensure your computer and the camera (Tail series) are connected to the same local network (LAN). You will then be able to watch the stream normally.
Should you have any other questions, please feel free to reply to this email or contact our support team at service@obsbot.com.
Best regards,
Minar Media Systems
Hello,
Yes, the OBSBOT Tail Air supports overhead shooting and can be mounted on the ceiling to capture a bird's-eye view straight down.
Best regards,
Minar Media Systems
Bonjour,
Merci de nous avoir contactés !
Pour obtenir de l'aide concernant ce problème, veuillez contacter notre service client à l'adresse service@obsbot.com. Notre équipe se fera un plaisir de vous aider à le résoudre.
Cordialement,
Minar Media Systems
Hello,
For details about our return policy, please refer to: https://www.obsbot.com/service/docs/warranty-refund
If you wish to return a product, please contact our customer support team at service@obsbot.com, and they will assist you further.
Best regards,
Minar Media Systems
In stock
I have been very happy with the OBSBOT camera so far. I purchased it to help livestream meetings and events, and it has worked really well for that purpose. The video quality is clear, the tracking features are impressive, and the setup was more manageable than I expected once I got familiar with the app and livestream settings.
I especially like how flexible it is for different use cases. It works well for a simple test stream, but it also feels capable enough for more formal meetings or public events. The camera movement and framing make the livestream look much more professional than using a basic webcam or phone setup.
There is a bit of a learning curve, especially with firmware updates, audio setup, and connecting to livestream platforms, but once everything is configured, the camera performs very well. Overall, I’m very satisfied with the purchase and would recommend it to anyone looking for a compact, high quality camera for livestreaming, meetings, or event recording.
Phenomenal. Couldn’t be more pleased. Lives up to ALL the claims and then some.
It look good and well made.
è stata una una scoperta entusiasmante, dovevo riprendere una tavolata di persone che mangiavano. con questo strumento ho risolto alla grande e con qualità.
credo proprio che prenderò anche degli accessori, anche la parte audio mi ha sorpreso per la pulizia del suono, comprerò sicuramente i microfoni pertinenti .
grande prodotto
Très bon produit et toujours trop cher.
Qualité des équipements obsbot.
J’attends un câble micro HDMI pour le raccorder au ATM pro.
I love the product so much .